| V1.1.2.790 |
02/09/2011 |
- Added support for Mobile printers.
|
V1.1.2.838
|
07/06/2011
|
- For mobile printers, commands for print speed, darkness and
media type are now sent to the printer and/or saved to a file.
- The direct communication window can now receive all data
sent by the printer. A port polling time out option can be
adjusted to control this.
- For mobile printers, there is now a ‘send and store’ file
option in the printer tools wizard.
- The PEAP, EAP-FAST, EAP-TLS and EAP-TTLS wireless securities
are now enabled correctly.
- Corrected translations in various languages.
- The darkness wizard now prints the entire batch of labels
using the correct darkness settings.
- The connectivity wizard button is now enabled when selecting
the KR403 printer.
- For EPL printers, the linerless media option command is now
sent when selected in the printer settings wizard.
- The Bluetooth friendly name is not sent to the printer if
the Bluetooth enabled option is unchecked.
- For QLn printers the correct commands are now sent to set
static ip addresses.
- For QLn printers commands are now generated for the wired
network option.
|
| V1.1.3.838 |
8/15/2011 |
- The "Send and store file in printer memory" feature for
Mobile printers has been corrected.
- The GX420s is now supported.
- Added Bluetooth Minimum Security Mode option in connectivity
wizard for EZ and QLn mobile printers.
|
| V1.1.4.838 |
9/14/2011 |
- The "Send and Store" feature for Mobile printers has been
corrected.
|
V1.1.8.986
|
1/20/2012
|
- Added the ability to set communication timeout in the
options dialog.
- Added the ability to select Standard or Internal character
delimiters in the options dialog. Added the ability to set the
printer DNS name in the connectivity wizard.
- "Connecting to printer" status message is now cleared in the
direct comm window once communication is established with the
printer.
- Username field is now enabled for EAP-TLS.
- The output is now correct when using three certificate
files.
- Bluetooth friendly name is not changed if no name is
entered.
- A dash character can now be used in the Bluetooth friendly
name.
- Binary data can now be received and displayed in the direct
comm window.
- Sensor settings can be set in the Printer Settings Wizard
for ZPL printers.
- Corrected SGD command output for Wired interface settings.
- Corrected some translations.
- Time interval setting in Printer Settings Wizard is now
enabled for mobile printers.
- 802.11n radio settings are available for ZT and QLn
printers.
- Connectivity Wizard is now enabled for Tabletop printers
with EPL firmware.
- The following printer models are now supported.
- GC420d
- GC420d (EPL)
- GC420t
- GC420t (EPL)
- QLn220 (ZPL)
- QLn320 (ZPL)
- ZE500-4 LH-203dpi ZPL
- ZE500-4 LH-300dpi ZPL
- ZE500-4 RH-203dpi ZPL
- ZE500-4 RH-300dpi ZPL
- ZE500-6 LH-203dpi ZPL
- ZE500-6 LH-300dpi ZPL
- ZE500-6 RH-203dpi ZPL
- ZE500-6 RH-300dpi ZPL
- ZT210-200dpi ZPL
- ZT210-200dpi EPL
- ZT210-300dpi ZPL
- ZT220-200dpi ZPL
- ZT220-200dpi EPL
- ZT220-300dpi ZPL
- ZT230-200dpi ZPL
- ZT230-200dpi EPL
- ZT230-300dpi ZPL
|
| V1.1.9.1042 |
3/14/2012 |
- Corrected an issue with the "Open Communication with
Printer" window minimizing in Vista and Windows 7.
- Corrected some translations.
- Implemented the ability to configure 802.11n settings on
applicable printers.
- Updated the sensor settings dialog in the Configure Printer
Settings wizard.
|